Raider RDP-WC04, Руководство пользователя

Страница: 8 / 68

8 www.raider.bg
When using equipment, a few safety
precautions must be observed to avoid
injuries and damage. Please read the
complete operating manual with due care.
Keep this manual in a safe place, so that the
information is available at all times. If you
give the equipment to any other person, give
them these operating instructions as well. We
accept no liability for damage or accidents
which arise due to non-observance of these
instructions and the safety information.
Safety information.
Important: Read the operating instructions
before assembling and using the appliance
for the first time. Check that the mains voltage
is the same as the mains voltage specified on
the rating plate. Only connect the appliance
to a properly fitted 230 V ~ 50 Hz shock-
proof socket. Minimum 16 A fuse. Pull out the
power plug in the following circumstances:
Whenever the appliance is not in use, before
opening the appliance and before all cleaning
and maintenance work.
Never clean the appliance with solvents.
Never pull the plug out of the socket by
pulling the cable.
Never leave the appliance unattended when
operational.
Keep away from children.
Take care to ensure that the power cable does
not get damaged by being run over, crushed,
pulled or suchlike.
Do not use the machine if the power cable is
in a less than perfect condition. If the power
cable has to be replaced, the replacement
must comply with the design specifications
of the manufacturer. Power cable:
H 05 VV - F 2 x 0.75 mm2
Never vacuum the following: Burning
matches, smoldering ash and cigarette
butts, combustible, caustic, inflammable or
explosive substances, vapor or liquids.
This appliance is not suitable for vacuuming
dust which can be harmful to health.
Store the appliance in a dry indoor location.
Never use the appliance if it is damaged.
Only allow the appliance to be serviced by an
authorized after sales service outlet.
Only use the appliance to carry out work for
which has been designed.
Take extra care when cleaning steps.
Use only genuine accessories and spare
parts. The appliance should not be exposed
to heat.
Unplug the appliance form the mains supply
socket after use and before every cleaning.
Pull the plug, not the mains cable, in order to
disconnect the appliance from the mains
Do not put any object into openings.
Do not use the vacuum cleaner without dust
container or dust filter in place.
The appliance should only be cleaned with a
dry or damp cloth; it should never immersed
in water. Do not use any solvents for cleaning.
Do not use the mains wire to carry the
appliance. Do not pull the mains wire over
sharp edges.
Intended use.
Vacuum cleaner for dry and wet cleaning
- effectively cleans dry particles and dust,
fluids on the floor, carpet, parquet and tiles.
Its functions are to remove dust, collect
liquids and dry surfaces after cleaning with
detergents. It is equipped with a plug for
switching on another electrical appliance
(max. 2000 W).
The wet and dry vacuum cleaner is designed
for wet and dry vacuuming using the
appropriate filter. The appliance is not suitable
for the vacuuming of combustible, explosive
or harmful substances. The machine is to be
used only for its prescribed purpose. Any
other use is deemed to be a case of misuse.
The user / operator and not the manufacturer
will be liable for any damage or injuries of any
kind caused as a result of this.
Before starting.
Important!
Before you connect the appliance to the
mains supply make sure that the data on the
rating plate are identical to the mains data.
The appliance may only be connected to a
shockproof socket.
Fitting the filter.
Important!
Never use the wet and dry vacuum cleaner
without a filter. Check that the filter is securely
fitted at all times.
Fitting the suction hose.
Connect the suction hose to the corresponding
connector on the wet and dry vacuum cleaner,
depending on the application required.
Vacuuming.
Connect the suction hose to the suction hose
connector.
Blowing.
Connect the suction hose to the blow
connector.