Raider RDP-SPSH20 solo, Руководство пользователя

Страница: 15 / 54

15
14.00-16.00 and in the evening after 22.00 in order to protect citizens from unwanted noise.
5.2. When working in particularly severe conditions, be careful not to overload the motor.
When overloaded, the speed of rotation of the motor drops and its noise changes. In this
case, stop, release the switch lever (4) and adjust the cutting speed. Otherwise, productivity
will be reduced and the machine may be damaged.
5.3. When cutting near edges, be careful not to pinch foreign objects with the machine.
5.4. Cutting productivity depends on the density, humidity, length of the branches, as well
as the cutting speed. Cutting productivity decreases with frequent scissor on and off. To
optimize cutting productivity, more frequent cutting, increasing the cutting height and
working at a moderate speed are recommended.
If necessary, the repair of your machine is best done only by qualified specialists in RAIDER
service centers, where only original spare parts are used. This ensures their safe operation.
6.Environmental protection.
In order to protect the environment, the power tool, accessories and packaging must be
suitably processed for the reuse of the raw materials contained therein.
Do not dispose of power tools in household waste! According to EU Directive 2012/19 / EC
on end-of-life electrical and electronic devices and as a national law, power tools that can
no longer be used must be separately collected and subjected to appropriate processing to
recover the contents in them secondary raw materials.