Raider RDP-SDWC20, Руководство пользователя

Страница: 17 / 77

17
Fitting the filter.
Important!
Never use the wet and dry vacuum cleaner
without a filter. Check that the filter is securely
fitted at all times.
Fitting the suction hose.
Connect the suction hose to the corresponding
connector on the wet and dry vacuum cleaner,
depending on the application required.
Vacuuming.
Connect the suction hose to the suction hose
connector.
Blowing.
Connect the suction hose to the blow
connector.
To extend the suction hose you can attach
one or more of the elements which make up
the suction tube to the suction hose.
ON/OFF switch.
To switch On the vacuum cleaner press the
button.
To switch Off the vacuum cleaner, press the
button again.
Cleaning and maintenance.
Cleaning.
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. We recommend that you clean the
appliance immediately after you use it.
Cleaning the appliance head.
Clean the appliance regularly with a damp
cloth and some soft soap. Do not use cleaning
agents or solvents; these may be aggressive
to the plastic parts in the appliance.
Cleaning the container.
The container can be cleaned with a damp
cloth and some soft soap or under running
water, depending on the amount of dirt.
Maintenance.
At regular intervals and before each use,
check that the filters in the wet and dry
vacuum cleaner are securely fitted.
Environmental protection.
In view of environmental power tools,
additional accessories and packaging must
be subjected to appropriate processing for
reuse of the information contained in these
materials.
Do not dispose of household waste power
tools! Under the EU Directive 2012/19/EC on
scrapped electrical and electronic equipment
and promoting law and national power
tools, which can not be used more, must
be collected separately and be subjected
to appropriate processing for recovery of
contained therein scrap.