Raider RDP-JS25, Руководство пользователя

Страница: 11 / 72

11
the manufacturer’s specified range of load.
4.2. Do not use jigd saw with a starting
switch is damaged. Jigd saw, which can not
be excluded and included as intended by the
manufacturer, is dangerous and should be
repaired.
4.3. Before you modify the settings of the
jig saw to replace work tools and additional
accessories as well as a long time when you
will not use jig saw, unplug the plug from the
supply network. This measure eliminates the
danger of imposing a jig saw inadvertently.
4.4. Keep Jig saw in places where they can
be reached by children. Do not allow them
to be used by persons who are not familiar
with how to work with them and have not
read those instructions. When you are in the
hands of inexperienced users, pierced saws
can be extremely dangerous.
4.5. Keep jig saw his care. Check whether
the mobile units operate impeccable, whether
it spells, if there is broken or damaged items
which distort or alter the functions of a jig
saw. Jig before using a saw, make sure that
the damaged parts to be repaired. Many
accidents are caused by poorly maintained
power tools and appliances.
4.6. Keep your cutting tools well sharpened
and always clean. Properly maintained
cutting tools with sharp edges have less
resistance and working with them easier.
4.7. Use Jig saw, attachment, working
tools, etc., according to the manufacturer’s
instructions. In doing so must comply with
specific operating conditions and operations
to perform. The use of jig of saws for various
applications provided by the manufacturer
increases the risk of accidents.
5. Maintenance.
The repair of your power is best carried
out only by qualified specialists in workshops
RAIDER, which used only original spare
parts. Thus ensuring their safe operation.
6. Instructions for safe handling of jig
saws.
6.1. Where there is danger at work affect
the work tools hidden beneath the surface
under tension wires or power cord, power
only to touch handles isolated. In contact
with the wire under tension, it is transmitted
to the metal parts of power and this may
cause electric shock.
6.2. Keep your hands off the cutting zone.
Do not touch below the workpiece. Threaten
to hurt yourself if you touch the cutting
sheet.
6.3. Touch electric tool to the workpiece,
after having it on you. Otherwise there is
a risk of occurrence of recoil if the cutting
sheet is zaklini in the workpiece.
6.4. During the careful cutting the main
plate (5) to interact with the workpiece
stable throughout its surface. If cutting is
zaklini sheet, it can cause breakage or recoil
of the cutting sheet.
6.5. After completing the first cut wait
jig saw stop. Then remove from the site of
the cut. So avoid the risk of recoil and you
can safely leave the power of the working
surface.
6.6. Use only cutting sheets in impeccable
condition. Blunt or curved blades may break
or cause reverse kick.
6.7. After sawing off the jig did not stop
cutting sheet forced by squeezing it. Cutting
sheet may be damaged, broken, or to cause a
reverse kick.
6.8. Use appropriate instruments to find
any hidden beneath the surface pipelines,
or contact the appropriate local supply
company. Into contact with the wires under
tension can cause fire or electric shock.
Pipeline damage can lead to explosion.
Deterioration of water has the effect of
major material damage and may cause
electric shock.
6.9. Provide workpiece. Detail, and attach
with appropriate appliances or braces is
anchored more firmly and securely than if
you hold it by hand.
6.10. Before you leave a jig saw, wait for
rotation to stop completely. Otherwise, use
work tool can touch another object and cause
uncontrolled transfer of power. Do not use
a jig saw where the power cord is damaged.
If during operation the cable is damaged,
do not touch, immediately disconnect the
plug from the outlet. Damaged power cables
increase the risk of electric shock.
7. Purpose of the jig saw.
Jig Saw is a manual with power isolation
second grade. Is driven by a collector of single-
phase motor. This type of power is widely
used for cutting wood, darvesnopodobni
materials and synthetic materials and metals.
The areas of use are carrying out repair and