Raider RDP-JS25, Руководство пользователя

Страница: 10 / 72

10 www.raider.bg
General guidelines for safe operation.
Read all instructions carefully. Failure of
the nature following instructions can cause
electric shock, fire and / or severe injuries.
Keep these instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit.
Disarray and poor lighting may contribute to
the occurrence of an accident.
1.2. Do not operate saw jig in an
environment with increased risk of an
explosion in the vicinity of flammable
liquids, gases or powders.
During operation of saws Knife separate
sparks that can ignite powders or fumes.
1.3. Keep children and bystanders at a
safe distance while working with a jig saw.
If your attention is diverted, you may lose
control over the jig saw.
2. Safety when working with electricity.
2.1. A jig saw the plug must be suitable for
contact. In no case is allowed to modify the
structure of the plug. When working with
electrical zero, do not use plug adapters.
Using original plugs and sockets reduces
the risk of electric shock.
2.2. Avoid touching your body to earthed
bodies, eg. pipes, heaters, stoves and
refrigerators. When your body is grounded,
risk of electric shock is greater.
Prevent jig saw the rain and moisture.
Infiltration of water into the jig saw
increases the risk of electric shock.
2.3. Do not use a power cord for the
purposes for which it is not provided, eg. to
carry a jig saw on cable or removing the plug
from the outlet. Protect cords from heat, oil,
contact with sharp edges or points of mobile
machines.
Damaged or twisted cables increase the
risk of electric shock.
2.4. When working with a chainsaw
pierced out, switch the machine only in
installations equipped with electric switch
Fi (safety shut-off switch with Residual
protection), and current leakage, which is
triggered when DTZ must be no more than
30 mA, according to “Regulation 3 device for
the electrical equipment and power lines.
Use only extension, suitable for outdoor use.
Using the extension, designed for outdoor
use reduces the risk of electric shock.
2.5. If you require the use of jig saw in
damp environment, including the machine
only in installations equipped with electric
switch Fi. Use of such a safety switch utechni
currents reduces the risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions
carefully and act cautiously and prudently.
Do not use a jig saw when you are tired or
under the influence of drugs, alcohol or
narcotic drugs.
A moment of distraction at work pierced
saw may have the effect of extremely serious
injuries.
3.2. Work with protective work clothing
and always with safety glasses.
Wearing Suitable for pierced saw and the
activities of personal protective equipment,
such as respiratory masks, healthy, tightly
closed shoes grapple with a stable, protective
helmet and silencers (hearing protectors),
reduces the risk of accident.
3.3. Avoid the danger of incorporating
jig saw inadvertently. Before you turn the
plug into the power supply network, make
sure the trigger switch is in position “off”. If,
when you carry a jig saw, keep your finger
on the trigger switch, or if you submit a jig
voltage of a saw, when included, there is the
risk of accident.
3.4. Before turning jig saw, make sure that
you removed it from all utilities. Utilities,
forgotten about moving unit can cause
injuries.
3.5. Avoid unnatural positions of the
body. Work in a stable position of the body
at any time and keep the balance. So you
can control the jig saw better and safer if
unexpected situations arise.
3.6. Work with appropriate clothing. Do
not operate with loose clothing or ornaments.
Keep your hair, clothes and gloves at a safe
distance from rotating units jig saw. Robes,
attire, long hair can be caught and carried
away by rotating units.
3.7. If possible use an external aspiration
system, make sure it is switched on and
functioning properly. Use of the aspiration
system reduces the risks due to the discharge
dust at work.
4. Respect to carefully jig saw.
4.1. Do not overload jig saw. Use Knife Saw
only as intended. Will operate better and
safer when you use the right saw stabbed in