Raider RD-WL03, Руководство пользователя

Страница: 9 / 74

9
CAUTION!
Read this manual carefully for your own safety before attempting to use the machine!
SAFETY INSTRUCTIONS
When working with the machine, always observe the instructions for use and attached to the equipment
of the instrument “Rules for Safety”.
In this manual, the following symbols:
CAUTION! Risk of injury or damage to the instrument.
CAUTION! Before starting work with the instrument familiarize yourself with the
instructions.
CAUTION! Use protective glasses.
1. HOW TO USE
Before Use
Attention! Before you start working with a lathe for wood, check the voltage and frequency of
power supply.
Attention! When working with woodworking tools take care! Always use safety glasses!
Place the device on a flat surface by providing sufficient perimeter work!
Just before you start working with the unit, ensure personal safety by using the personal protective
equipment (goggles, gloves and appropriate clothing)
To prevent adverse events, wear their hair tied, and your clothes should not be free. Desirable not to
work with jewelry (necklaces, bracelets, etc.) - there is imminent danger to fall close to the rotating
parts of the machine!
In cases of damaged or broken cable do not turn on the item until the problem is fixed by authorized
person.
ENGINE SPESIFICATIONS
The engine of RD-WL03T is designed with maximum speed of rotation of 3400 rpm./min.
Never use the motor with other technical parameters mentioned in this manual!
Do not clean electrical components with a damp cloth! It is getting moisture into the electrical system
of the device which can cause serious damage!
To protect yourself and others, the unit must be grounded! Possible appearance of power fluctuations
or short circuit occurs!
2. ASSEMBLY
1) To prevent short circuit, do not plug in the power cord completely before assembling and provide
grounding of the appliance!
2) Check the equipment of the set shown below. In discrepancy contact the selling dealer! Do not
drive to the assembly of the device without the definite parts! You can seriously endanger your health,
and damage the machine!
3) To prevent the occurrence of fire hazard, do not use gasoline, diesel or more. highly flammable
substance near the unit!
4) To protect the parts of the unit in good condition - manufacturers use wax affixed to metallic
elements. Before proceeding to assemble them clean with a dry cotton cloth!
!