17
further.
Use the push stick from the start when feeding short workpieces.
• Switch the machine off.
RIP FENCE
The rip fence allows a mitre of up to 45° to be sawn.
To do this, use the protractor gauge , which moves past the rip fence.
9. Maintenance and repair
In order to maintain the blade in constant repair and technical readiness work, the following technical
month service should be carried out - ETO. ETO - every shift Maintenance includes:
• External examination;
• Check the electrical cords, plugs and grounding;
• Check the presence of guard.
• Cleaning (rubbing) the machine.
Repairs saws must be made by specialized persons.
10. Rules of storage
Storage the machine should be at a temperature of plus 40 ° C to minus 50 ° C with relative humidity
less than 80% (at a temperature of 20 ° C). Under longtime storage at subzero temperatures,
connecting to the machine to get to warm, when you use.
In case the machine is being stored for a long time it is necessary to thoroughly clean the corroded
parts of the machine and coat them with conservation lubrication of К-17 GOST 10877-76 or other
similar lubrication.
11. ENVIRONMENTAL PROTECTION.
The machine should be operated with an external exhaust ventilation or external dust
extraction unit.
The aluminum and plastics parts are labeled, which allows them to sort and recycle.
In view of environmental power tools, additional accessories and packaging must be
subjected to appropriate processing for reuse of the information contained in these materials.
Do not dispose of household waste power tools! Under the EU Directive 2002/96/EC on scrapped
electrical and electronic equipment and promoting law and national power tools, which can not be
used more, must be collected separately and be subjected to appropriate processing for recovery of
contained therein scrap.