Raider RD-TC01, Руководство пользователя

Страница: 13 / 42

13
Making a Circle Cut.
Figure 6. Adjusting the Circle Scale.
Cut a Circle Hole.
the Press Handle.
1. Assemble the circle cutter assembly onto the
tool as previously discussed.
2. On the tile, mark the center point of the circle,
and measure or mark the circumference of the
intended circle cut.
3. Squeeze the Press Handle (#A) downward,
lifting the drill point and knife body above the level of
the cutter base.
4. Place the tile on the EVA cushion, with the
centerpoint of the circle directly under the center drill
of the circle cutter. Release the Press Handle slowly,
and adjust the tile to carefully align the Triangle Drill (#G) with the enter point of the hole marked on
your tile.
Figure 7. Locating the Tile Before Releasing the Press Handle.
5. Loosen the nut on the Knife Body (#F), and slide
the knife body until the knife point aligns with the
circumference you have marked on the tile. Retighten the
nut.
6. Holding the tile firmly onto the EVA Cushion, rotate
the Crank (#B) clockwise to drill into the tile, and cut the
circle. Continue rotating the crank until the circle has been
completely cut through the tile.
Figure 8. Turning the Crank to
Cut a Circle Hole.