Raider RD-PHE04, Руководство пользователя

Страница: 8 / 38

8 www.raider.bg
ATTENTION!
Read this manual carefully for your own safety before attempting to ekspoloatatsiya appliance!
SAFETY INSTRUCTIONS
When working with the unit always follow these instructions for use and attached to the equipment
“General safety rules”.
In this manual, following symbols are used:
ATTENTION!
Risk of injury or damage to the instrument.
ATTENTION!
Before starting work with the tool familiarize yourself with the instructions.
Attention!
Meet the instruction manual before using the device.
Attention! Use the machine according to the work for which it is intended. Do not overload! Keep this
guide!
METHOD OF OPERATION
This hydraulic pull back ram can be used vertically or horizontally. Pull, bend or straighten metal/all
steel construction.
Your Pull-Back Ram is designed to be used with a hydraulic pump and hydraulic hose.
Connect the hydraulic ram with the conclusion of the pump. Make sure you have a stable
relationship between them, before moving to pump.
Attention!
Check before each use. Do not use in the presence of cracks in the hull or other mechanical
damage.
- Release the intake valve.
- Carefully release valve clockwise srelka.
- Adjust the hydraulic ram;
Important! The pump can be used in various positions from horizontal to vertical. Always keep the
hoses to pump down where not horizontally!
- With pump handle not adjust succumb to pressure;
- Once you’re done slowly and carefully close the valve counter-clockwise;
- Close the intake valve;
Pull-Back Ram and Hydraulic pump assembly
- Unscrew and save the end plug (#1) located on the end of the Pull-Back
Ram coupler
- Securely screw the Hydraulic Pump Hose into the Pull Back Ram coupler
- Its hooks will turn to accept hooking from different angles.
- Position the Hydraulic Pump on a stable surface close to the pulling area.
- Hook one end of the Pull-Back Ram to the object to be moved and the other end to a stable base.
A chain or strap may be used on either side to provide a hooking surface. Make sure the chain or
strap is rated to support the pulling weight.
- Slowly provide pressure to the Pull-Back Ram. Use caution; watch for damage to stressed areas
SKU 33611 For technical questions, please call 1-800-444-3353. Page 3
unpAcKing
When unpacking your Pull-Back Ram, check to make sure the following parts are included.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual.
item # description Qty
1 Pull-Back Ram 1
2 End Plug 1
3 Female End Hook (attached to Ram) 1
4 Male End Hook (attached to Ram) 1
OVerView
Your Pull Back Ram is designed for pulling up to 10,000 pounds. Never exceed the maximum
weight for the Pull-Back Ram as it may damage the equipment and cause serious injury.
Your Pull-Back Ram is designed to be used with a hydraulic pump that and hydraulic hose
may be purchased separately from Harbor Freight.
AsseMbly
pull-bAcK rAM and HydrAulic puMp Assembly
Step 1: Unscrew and save the END PLUG (#14) located on the end of the Pull-Back
Ram COUPLER (#16) as shown in Figure 1.
Figure 1 — Removing End Plug Figure 2 — Connecting Hose
Step 2: Securely screw the Hydraulic Pump Hose (not included) into the Pull Back Ram
COUPLER as shown in Figure 2.
Step 3: Refer to the Hydraulic Pump instruction manual for pump assembly instructions.
(#1)
(#2)