Raider RD-LM30, Руководство пользователя

Страница: 17 / 76

17
Faults Removal Reasons
Unusual noise.
Bolt of the blade is loose or connections
between fasteners.
Fasten the parts.
Strong vibrations.
Distorted and damaged knife. Immediately stop the mower
and replace the knife in a
specialized service.
Unequal mowing.
Engine work
hard and reduce
turnovers.
The grass is very high. Increase mowing height.
The blade is blunt. Replace or tipped knife. See
5.2.
It is possible that the mower is fuzzy and
blocked
Look underneath the mower
and clean it. Work always with
protective gloves.
The blade can be installed incorrectly. Check. See 5.2
The grass remains
on the ground and
the basket is not
collecting it
The grass is very moist. Wait for grass areas to dry
Outlet is clogged Disconnect the plug and clean
it.
Grass baskets full Disconnect the plug and
empty the basket
Basket grass is contaminated. Switch off the power plug from
the mains electricity. Cleaning
the basket. Baskets should
always to be clean to allow air
to pass freely through it.
If necessary, repair your mower is best carried out only by qualified experts in workshops
on RAIDER, which used only original spare parts. Thus ensuring their safe operation.
7.Protection of the environment.
For the environmental protection of the power tool, the electrical appliances and
packaging must undergo appropriate processing for the re-use of the valuable raw
materials contained therein. Do not dispose of power tools in household waste!
According to EU Directive 2012/19/EC on end-of-life electrical and electronic
devices and the validation and as a national law, power tools that can no longer be
used must be separately collected and subjected to appropriate processing for the recovery of
the contents making them valuable raw materials.