10
www.raider.bg
General guidelines for safe operation.
Read all instructions carefully. Failure of the
nature following instructions can cause electric
shock, fire and / or severe injuries. Keep these
instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit.
Disarray and poor lighting may contribute to the
occurrence of an accident.
1.2. Do not operate saw jig in an environment
with increased risk of an explosion in the vicinity
of flammable liquids, gases or powders.
During operation of saws Knife separate
sparks that can ignite powders or fumes.
1.3. Keep children and bystanders at a safe
distance while working with a jig saw.
If your attention is diverted, you may lose
control over the jig saw.
2. Safety when working with electricity.
2.1. A jig saw the plug must be suitable
for contact. In no case is allowed to modify
the structure of the plug. When working with
electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the
risk of electric shock.
2.2. Avoid touching your body to earthed
bodies, eg. pipes, heaters, stoves and
refrigerators. When your body is grounded, risk
of electric shock is greater.
Prevent jig saw the rain and moisture.
Infiltration of water into the jig saw increases the
risk of electric shock.
2.3. Do not use a power cord for the purposes
for which it is not provided, eg. to carry a jig saw
on cable or removing the plug from the outlet.
Protect cords from heat, oil, contact with sharp
edges or points of mobile machines.
Damaged or twisted cables increase the risk
of electric shock.
2.4. When working with a chainsaw pierced
out, switch the machine only in installations
equipped with electric switch Fi (safety shut-off
switch with Residual protection), and current
leakage, which is triggered when DTZ must be
no more than 30 mA, according to “Regulation
3 device for the electrical equipment and power
lines. Use only extension, suitable for outdoor
use. Using the extension, designed for outdoor
use reduces the risk of electric shock.
2.5. If you require the use of jig saw in damp
environment, including the machine only in
installations equipped with electric switch Fi.
Use of such a safety switch utechni currents
reduces the risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions
carefully and act cautiously and prudently. Do
not use a jig saw when you are tired or under
the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work pierced saw
may have the effect of extremely serious injuries.
3.2. Work with protective work clothing and
always with safety glasses.
Wearing Suitable for pierced saw and the
activities of personal protective equipment, such
as respiratory masks, healthy, tightly closed
shoes grapple with a stable, protective helmet
and silencers (hearing protectors), reduces the
risk of accident.
3.3. Avoid the danger of incorporating jig saw
inadvertently. Before you turn the plug into the
power supply network, make sure the trigger
switch is in position “off”. If, when you carry a jig
saw, keep your finger on the trigger switch, or if
you submit a jig voltage of a saw, when included,
there is the risk of accident.
3.4. Jig before turning saw, make sure that
you removed it from all utilities.
Utilities, forgotten about moving unit can
cause injuries.
3.5. Avoid unnatural positions of the body.
Work in a stable position of the body at any time
and keep the balance. So you can control the jig
saw better and safer if unexpected situations
arise.
3.6. Work with appropriate clothing. Do not
operate with loose clothing or ornaments. Keep
your hair, clothes and gloves at a safe distance
from rotating units jig saw. Robes, attire, long
hair can be caught and carried away by rotating
units.
3.7. If possible use an external aspiration
system, make sure it is switched on and
functioning properly. Use of the aspiration
system reduces the risks due to the discharge
dust at work.
4. Respect to carefully jig saw.
4.1. Do not overload jig saw. Use Knife Saw
only as intended. Will operate better and safer
when you use the right saw stabbed in the
manufacturer’s specified range of load.
4.2. Do not use jigd saw with a starting switch
is damaged. Jigd saw, which can not be excluded
and included as intended by the manufacturer, is
dangerous and should be repaired.
4.3. Before you modify the settings of the
Содержание RD-JS28 Quick
Страница 50: ...50 www raider bg EXPLODED VIEW OF RD JS28 ...
Страница 68: ...68 www raider bg ...
Страница 71: ...71 RAIDER POWER TOOLS ...