Raider RD-EBV03, Руководство пользователя

Страница: 12 / 32

12 www.raider.bg
(with 230 V AC) that is equipped with a 10A fuse
or higher.
The socket-outlet has to be safeguarded by
an earthleakage circuit breaker (e.l.c.b.). The
operating current must not exceed 30 mA.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the warning signs on the
equipment.
1. Read the directions for use before operating
the tool.
2. Do not use the tool in rain or snow. Do not
expose the tool to wet conditions.
3. Keep all other persons away from the danger
zone.
4. Wear goggles and ear muffs.
5. Switch off the tool and pull out the power plug
before carrying out any cleaning or maintenance
work.
6. Rotating parts. Keep your hands and feet
away from all openings.
2. Layout (Fig. 1)
1. Front suction tube
2. Rear suction tube
3. Handle
4. Carrying strap
5. ON/OFF switch
6. Power cord
7. Debris bag
8. Selector switch for vacuum/blower
9. Guide roller
10. Speed controller (only on the BG-EL 2500 E)
3. Proper use
The garden blower vac is designed to handle
only foliage and garden refuse such as grass
and small branches. Any other use is prohibited.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user / operator and not
the manufacturer will be liable for any damage
or injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
4. Before starting the equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating
plate are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
4.1 Assembling the suction tube
First pull out the suction tube to its full length
Then affix with the supplied screws and fit the
protective caps.
Note: Do not disassemble the suction tube any
more once it has been assembled.
4.2 Fitting the debris bag
First hook the two eyelets onto the
corresponding hooks on the motor housing and
the suction tube. Then slip the debris bag over
the port on the motor housing.
Make sure that there is an audible click when
they engage.
Start up the tool only after it is fully assembled.
Always inspect the tool power cord for damage
before starting up. The tool may only be used if
the cord is in flawless condition.
5. Operation
5.1 Sizing the strap (Fig. 1)
Size the length of the carrying strap (4) so that
the vacuum tube just clears the ground. The
guide rollers (9) at the bottom end of the suction
tube will help you to maneuver the suction tube
on the ground.
5.2 Connecting the tool to the power supply and
switching on
The tool can be plugged into any socket-outlet
(with 230 V AC) that is equipped with a 10A fuse
or higher.
The socket-outlet has to be safeguarded by
an earthleakage circuit breaker (e.l.c.b.). The
operating current must not exceed 30 mA.
Insert the tool plug into the power cord coupling
(extension).
Secure the power cord with the sleeve provided
on the tool as shown.
To switch on, press and hold the ON/OFF
switch.
To switch off, let go of the ON/OFF switch.
5.3 Selecting the mode of operation
5.3.1 Suctioning
Turn the lever to position F. You can do this
both when the device is at a standstill
and while it is running.
5.3.2 Blowing
Turn the lever to position G. You
can do this both when the device is at a
standstill and while it is running.
Channel the air stream forward and walk slowly
to blow foliage or garden refuse into a pile or to
clear out hard-to-reach places.
Important!
Empty the debris bag before blowing.
Otherwise, the material that has been