Raider RD-CS25, Руководство пользователя

Страница: 9 / 60

9
Never tighten the hand saw in a vice.
MAINTENANCE
1. Unplug the power cord before cleaning
the saw.
2. Clean the machine regularly, so ensure its
longevity.
3. Lubricate with oil periodically rotating
circular elements.
4. Periodically check the wear of carbon
brushes for electric motors. Allowable wear
should not be more than 5-6 cm
5. When replacing the carbon brushes let the
machine run for 10 minutes at idle. To change it is
necessary to develop a screwdriver caps on both
sides of the hull.
6. Periodically inspect the power cord injuries.
Upon finding such as contact company service
out of warranty.
SAFETY INSTRUCTIONS
Use of electrical saw is the tool in order
reduce the risk of fire, electric shock and
injury, they must be subject to the following basic
safety precautions.
Read all these instructions BEFORE to launch
this product. Keep these instructions:
1. Check the rating of, with companies
indicated on the plate.
2. Keep the tool do the work area clean.
Clutter operate the site increases the risk of
accidents;
3. Be aware to operate the site conditions
Do not leave the tool to rain. Do not use the
tool in damp or wet environment. Work saw is
good lighting. Do not use the tool near flammable
liquids or gases;
4. Protective hair against electric shock
Avoid contact with the body grounded surfaces
(eg pipes, radiators, ovens, refrigerators);
5. Do not allow children away
Do not allow outsiders to contact tool or cord;
Hold them off operate the place.
6. Keep unused tool in place
Keep the tool when not in use at the moment,
locked in a dry, which can be accessed by
children;
7. Do not overload the tool
He will do the tool do the work better and safer
in the range indicated by the manufacturer;
8. Use the right tool
Do not try to force small tools or attachments
to do the job of a great and powerful tool. Do not
use tools for specific activities (eg: Do not use a
circular saw cuts on branches or trunks);
9. Work with correct operate the clothing
Do not wear loose clothing or jewelry, they
can be caught in moving machine parts are.
When grinding outdoors is recommended to
wear protective hair rubber gloves and shoes
with stable tread. If you have long hair, wear
protective hair covering;
10. Use safety glasses
Furthermore, use breathing mask or if cuts is
associated with release of suction;
11. Use dust collectors
If the equipment can be placed for extract
and sabipane of suction, and assure their place
ppavilno use;
12. Grounding-power cord.
Never Hold tool power cord, never pull cord to
disconnect the power cord, cable and protective
hair from oil and heated to dopip objects and
sharp edges;