Raider RD-CS25, Руководство пользователя

Страница: 8 / 60

8 www.raider.bg
WARNING!
Read the manual carefully for your own safety
before attempting to operate the machine!
SAFETY INSTRUCTIONS
When the machine always follow these
instructions for use and supplied attached to
the instrument “General rules for occupational
safety.”
In this manual the following symbols are used:
WARNING! Risk of injury or damage to
the instrument.
WARNING! Before starting work with the
tool to read the instructions.
WARNING! Use safety googles.
METHOD OF USE
BEFORE USE
Attention! Before you start working with
circular saw, check the voltage and frequency of
the electrical network.
Attention! Check whether the protective
cover is moving normally, without interfering in
some sort of way blade.
Attention! Place the blade by selecting
disk rendered technical parameters.
1. Check the blade meets the following
requirements: its speed is equal to or greater
than that of the circular.
Attention! Never use cracked or damaged
saw blade.
2. Before placing the blade make sure saw is
disconnected from the power cord. And the key is
in position “OFF”.
FIXING DETAIL
Place the workpiece as proved in the figure
below
To prevent “kick” of the circular do
not put the detail in the following way:
Keep always saw with both hands - firmly and
steadily. This will prevent unwanted movements.
Never hold short details with a hand for processing.