15
these instructions before operating the appliance.
SAFETY INSTRUCTIONS
When using the tool to reduce the risk of personal injury, you should lift with the following basic
safety precautions.
Read all these instructions before attempting to operate the device. Save these instructions:
1. Check the pressure indicated on the nameplate
The unit can not operate at a pressure exceeding 600 kPa!
2. Keep work area clean.
Disordered work area increases and benches invite accidents;
3. Conform with work area
Do not expose power tools to rain. Do not use tool in damp or wet locations.
5. Do not let the children close to the work area.
Do not allow outsiders to contact tool.
6. Keep unused tools in a suitable place.
Keep unused tools in dry, locked places, which can not be reached by children;
7. Do not force the tool
He will do the job better and safer at the rate it was intended;
8. Use the right tool
Do not try to force small tools or attachments to the job you are doing a great and powerful tool.
9. Work the job with appropriate Clothes.
Do not wear loose clothing and ornaments, they can be caught in moving parts. When working
outdoors is recommended wearing Guard Rubber gloves and shoes with stable grab. If you have
long hair, wear protective hair covering to contain;
10. Use safety glasses
Also use face or dust mask.
11. Connect dust extraction equipment
If devices can be placed to extract attachments and separate the dust, assure these are
connected and properly used;
13. Secure work product
Use clamps or vise to Secure a workpiece, it is safer than if it Holding it by hand, and you’ll be
able to use both hands to operate the tool;
14. Do not stretch to reach objects beyond you.
Work is always in a stable position and constant Keep balance;
15. Treat Maintain tools with care
Keep tools sharp and clean for grinding better and safer. Follow instructions for maintenance and
changing accessories. Inspect Inspect cord and plug the tool periodically and, if damaged, have
them repaired by a qualified person. Inspect extension cords periodically and replace if damaged.
Keep handles dry, clean and soiling them with oil or grease;
16. Disconnect tools from power source. Disconnect tools from power source when not in use
before maintenance or when changing accessories such as blades, bits and cutters;
17. Do not leave keys in the tool
Habit before starting up the tool to see that keys and adjusting wrenches are removed from it;
18. Guard against inadvertent inclusion
Keep not included in the tool before servicing to put your finger on the switch. Ppi inclusion of the
tool before servicing is uvepete that trigger ppekasvach in the off position;
19. When grinding use extension of periodically
When tool periodically to use only for its intended purpose and so marked extension;
20. Stay alert
Watch what you are doing, use common sense and do not operate tool when you are tired;
21. Check damaged parts
Before you use the tool, always carefully check the guarding and other parts of the job properly
