Raider RD-AG36, Руководство пользователя

Страница: 22 / 92

22 www.raider.bg
electric grinders in safety switch Fi (safety shut-off switch with Residual protection),
and current leakage, which is triggered when Fi should be no more of 30 mA.
Make periodic breaks at work.
Keep and refer to the accessories carefully.
18.2. Replacing the carbon brushes. Worn-out (shorter than 5 mm), or broken carbon
brushes of the engine should be replaced. Always replace both the two brushes. Work
on replacement of carbon brushes entrusted only to qualified specialists with original
spare parts in service of RAIDER.
18.3. The repair of your power tool is best carried out only by qualified specialists
in service RAIDER, which used only original spare parts. Thus ensuring their safe
operation.
19. Environmental protection.
In view of environmental protection electrical appliances, additional accessories
and packing must be subject to appropriate processing for reuse of the compound
materials.
According the European Guideline 2012/19/ЕС for Waste Electrical and Electronic
Equipment and its implementation into national right, power tools that are no longer
usable must be collected separately and disposed of in an environmentally correct
manner.
Displayed items:
1. On/Off switch.
2. Protective knob for trigger switch (prevents accidental switching).
3. Button for blocking the shaft.
4. Auxiliary handle
5. Flange alignment.
6. Guard.
7. Additional threaded hole for the auxiliary handle. For greater convenience in
operation, auxiliary handle can be moved left or right of grinders.
8. Retainer nut.
Protective guard for grinding. Protective guard for cutting.
(Not included in the equipment.)
Caution - Read the operating instructions to reduce the risk of inquiry.
Wear safety goggles. Sparks generated during working or splinters, chips and
dust emitted by the device can cause loss of sight. Wear ear-muffs.
The impact of noise can cause damage to hearing.