Raider PRO RDP-WP45, Руководство пользователя

Страница: 10 / 66

10 www.raider.bg
General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following
instructions can cause electric shock, fire and / or severe
injuries. Keep these instructions in a safe place.
1. Safety.
The connection to the grid should be done by an electrician
with corresponding qualifications and in accordance with
IEC 364. Mandatory inclusion of the pump is only in electrical
installations equipped with electric switch Fi (safety shut-off
switch with Residual protection), and current leakage, which is
triggered when DTZ must be no more than 30 mA, according
to “Regulation 3 of the Spatial electrical equipment and power
lines. Information on the voltage of the electricity network and the
type of plate must comply with the data on your grid. Use only
extension for cable 3 × 1,5 mm2 plug capable of coupling with
an increased degree of moisture resistance and protection from
water splashes. In use, extension of the cable and plug contacts
must be fitted with a grounding conductor. Cables should be
coiled or twisted. It is necessary to protect the pump from the
direct impact of rain. All electrical connections must be protected
from moisture. Be assured that under no circumstances, water
and moisture will not reach the outlet or the pump. A water jet
pump must not be aimed at people, electrical appliances or
pump itself. In winter conditions, take measures against possible
freezing. Not allow the use of the pump by children. Take the
necessary steps to prevent children’s access to the pump or the
power cord. Pump should not be included without water!
1.1. Stay in place around the pump clean and well lit.
Disarray and poor lighting may contribute to the occurrence of
accidents.
1.2. Do not install the pump near the middle with an
increased risk of an explosion in the vicinity of flammable liquids,
gases or powders.
1.3. Keep children and bystanders at a safe distance.
1.4. Avoid touching your body to earthed bodies, eg pipes.
When your body is grounded, risk of electric shock is greater.
1.5. Protect the power cord from heat, oil, contact with sharp
edges or points of mobile machines. Damaged or twisted cables
increase the risk of electric shock.
1.6. Should be excluded from the pump power before
carrying out maintenance work in. Do not allow the pump to be
pulled and held for the power cord.
1.7. In order to ensure safety should only use genuine parts
or parts recommended by the manufacturer. Not use the pump
if the power cord or other element of the pump is damaged.
Damaged power cables increase the risk of electric shock.
1.8. The pump is designed so that all moving parts and hull
ensure safe conditions for use. For damage caused by attempts
to change the structure of the pump manufacturer is not liable.
1.9. Not use the pump for pumping liquids other than water,
particularly such as power, fluids used for cleaning or other
liquid chemicals.
1.10. Failure to comply with the instructions may lead to
electric shock, fire and / or severe injuries.
2. Functional description and purpose. You purchased
a machine monobloc, single, Self-priming pump, driven by
a collector single-phase motors with extended shaft directly
connected to the pump. Connecting to the pipeline is threaded
joints with a diameter of 1. Thread of the pump itself is internal.
A single-phase motor.
3. Applications: The pump is designed for household use
for personal use at home and garden. For fixed installation and
pumping water from wells and other passive waters. It may only
be used within the application according to the technical data.
3.1. The pump is mainly suitable for the following
applications:
- Irrigation and watering of lawns, beds and vegetable
gardens.
- The pumping of water reservoirs and ponds.
- For water-drainage from wells, tanks and rainwater tanks.
- The pump is suitable for pumping clean water, rain water
and chlorinated water (water pools).
3.2. Inappropriate use. The pump should not be used
continuously. It is not suitable for extraction of: drinking water,
sea water, food, dirty water, aggressive funds, corrosive
chemicals, flammable, explosive or gaseous fluids, fluids that
are greater than 35 ° C water containing sand and abrasive
particles.
4. Installation of the pump, put into service.
4.1. Place the pump on a flat, dry, stable and horizontal
space.
4.2. Make sure it is protected from rain and direct water
spray.
4.3. At the bottom of the suction pipe must be fitted with
non-return valve. Without it is impossible altogether (bleeding)
and water.
4.4. Install the inlet pipe so that a constant slope from the
pump to the water source. In no case should allow part of the
intake manifold is of greater height than the pump because of
the possibility of the emergence of “hovercraft”.
4.5. In the presence of sand in the water must be installed
filter.
4.6. Before you join, and the pump inlet pipe should be filled
with water. Before putting into operation each pump must be
filled with water to a force-pipe nozzle, to be able to suck away.
Rotation of the pump without water, repeatedly cutting her life.
4.7. In case of damage due to operation of the pump dry,
the security lapse.
4.8. Filling the pump with water (bleeding). Open for pouring
stopper (4) and pour water while pumping chamber is not filled.
Must merge enough water to fill the entire intake manifold and
the turbine chamber to the pump. If despite your efforts pumping
chamber is not filled, this means that non-return valve (1)
mounted at the bottom of the inlet pipe is not in working order
and must be replaced.