Raider Pro RDP-SST20 SOLO, Руководство пользователя

Страница: 13 / 76

13
This also applies to the person helping to support
or adhere.
2.3. Charge the cartridge only when the
appliance is switched off!
2.4. Do not use the electric wire gripper.
2.5. Secure the workpiece. Fixing it is safer
with a clamping mechanism or vice than with a
hand holding it.
2.6. DANGER OF INJURY! Only use the
appliance with its staples and nails. Be careful
that brackets or nails do not protrude from the
workpiece and do not pierce it.
2.7. Short mode of operation: Allow the
appliance to cool down after 15 minutes of
operation.
2.8. Never fire staples or nails into the air.
Closed brackets or nails may cause serious
injuries.
2.9. Only connect soft materials such as
wood or fabrics to the appliance. Otherwise, the
appliance may be damaged.
3. Installation instructions
The machine comes without battery and
charger. Only use batteries and chargers from
the R20 series
4. BEFORE USE
• CHARGER LOAD
- squeeze the filler slider 3 (see Fig. 1).
- Remove the slider 3 from the magazine 4 of
the appliance.
- Load cartridge 4 with brackets or nails.
Instructions for loading nails:
For nail loading, use the left channel as shown
in detail in Fig. 1. Note that the head of the nail
should always be up.
Note: When charging, consider the maximum
amount of about 85 clamps or 75 nails.
- after charging, slide the slider 3 into the
magazine 4 until the limit stops until you feel it
and hear it snap.
Note: From the fill level indicator 5 you can find
out if there are more brackets in the magazine.
5. Functions and features
Proper use
The battery tacker is intended for home use
when picking cardboard, insulating materials,
leather, cloth (textile or natural fibers) and the
like on solid and softwood, thrash boards or
plywood. Its use is only allowed in dry rooms. Any
other application or modification of the machine
is considered to be inappropriate and involves
significant accident hazards. The manufacturer
is not responsible for any damages caused by
inappropriate use. The appliance is not intended
for industrial use.
6. WORK WITH THE APPARATUS
Turn on
Press the device in place of the material
where you want to clamp the nail / nail.
Unlock the release button 1.
Press the trigger 2.
7. CLEANING AND MAINTENANCE
Risk of injury!
Always keep the device clean, dry and free
from oil or grease.
Use a dry cloth to clean the hull.
Never use solvents such as gasoline, alcohol,
ammonia and water, etc. These solvents can
damage the plastic parts.
8. TROUBLESHOOTING
Risk of injury!
Unplug the device and unplug the power
outlet before operating the device.
Reason:
Clamp or nail is blocked in the device.
Solution:
Open the magazine slider. Loosen the tension
on the clamps.
Remove the bracket or nail.
9. Environmental protection.
In order to protect the environment, the
machinery, accessories and packaging must
undergo appropriate processing for the re-use of
the raw materials contained therein. To relieve
recycling, details made from artificial materials
are appropriately marked. Do not throw away
machinery at household waste! Under Directive
2012/19 / EC on end-of-life electrical and
electronic devices and the validation and as a
national law, machinery which can no longer
be used must be separately collected and
processed appropriately for the recovery of the
waste contained therein valuable secondary raw
mater