Raider Pro RDP-SCHS20, Руководство пользователя, Страница: 75 / 156

75
6.17. Polnilnika ne uporabljajte na vnetljivi podlagi (npr. Papir, krpa) ali v bližini vnetljivih snovi. Zaradi polnjenja
polnilca v procesu polnjenja obstaja nevarnost požara.
6.18. Pred vsako uporabo preverite stanje polnilnika, kabla in vtiča. V primeru napak polnilnika ne uporabljajte.
Polnilnika ne poskušajte razstaviti. Vsa popravila je treba dodeliti pooblaščenemu serviserju. Nepravilna namestitev
polnilnika lahko povzroči električni udar ali požar.
6.19. Če polnilnika ne uporabljate, ga je treba izključiti iz električnega omrežja.
6.20. Popravilo poškodovanega polnilca je prepovedano. Popravilo polnilnika dovoli samo proizvajalec ali pooblaščeni
servisni center.
7. Zaščita pred vplivi okolja.
7.1. Polnilnik in baterije zaščitite pred vlago in dežjem. Vlaga in dež lahko povzročijo nevarno škodo.
7.2. Ne uporabljajte polnilnika ali baterije v bližini vnetljivih hlapov in tekočin.
7.3. Polnilnik in baterijo uporabljajte samo na suhih mestih in pri sobni temperaturi od 0 do 45 ° C.
7.4. Polnilnika in baterije ne shranjujte na mestih, kjer lahko temperatura preseže 30 ° C
particular,še posebej, polnilnika ne puščajte v avtomobilu, parkiranem na soncu.
7.5. Zaščitite baterije pred pregrevanjem. Preobremenitev, prekomerno polnjenje in izpostavljenost neposredni sončni
svetlobi will result in overheating of the cells. Never charge or operate batteries that have overheated - replace them
as soon as possible.
7.6. Storage of batteries, chargers and rechargeable tools. Conditions for use.
Store the charger and the battery charger only in a dry place and at an ambient temperature of 10-30 ° C. Protect
them from moisture and direct sunlight. Only recharge fully charged rechargeable batteries / charged at least 40% /.
When operating, use the battery charger, angle grinder and battery only in a dry place and at an ambient temperature
of 0-45 ֯ C.
7.7. Protect the lithium-ion battery from frost. Rechargeable batteries that are stored below 0 ֯ C for more than 60
minutes should be discarded.
19.8. When handling batteries, be aware of the electrostatic charge. Electrostatic discharges cause damage to the
electronic protection system and battery cells. Beware of the electrostatic charge and never touch the battery poles.
8. Maintenance and service.
8.1. Maintenance and cleaning.
To work well and safely, keep the angle grinder and the ventilation openings clean. Make periodic breaks in work.
Store and handle the accessories carefully.
Wipe the machine with a clean cloth or blow it with compressed low pressure air. Clean it regularly with a damp cloth
and a little soft detergent. Do not use detergents or solvents.
8.2. The cordless brush cutter is equipped with a brushless motor.
8.3. If an abnormal noise occurs on the cordless brush cutter, stop working immediately and contact your nearest
RAIDER service center.
9. Environmental protection.
9.1.In order to protect the environment, the power tool and packaging must be suitably processed for the re-use of
the raw materials contained therein. Do not dispose of power tools in household waste! According to the European
Union Directive 2012/19 / EC on end-of-life electrical and electronic devices and the validation and as a national law,
power tools that can no longer be used must be separately collected and subjected to appropriate processing for the
recovery of the contents raw materials.
9.2. Rechargeable battery.
Lithium-ion battery (Li-ion).
Do not dispose of batteries in household waste or in water tanks! Do not burn them!
Batteries should be collected, recycled or disposed of in an environmentally friendly way. According to Directive
2006/66 / EC, faulty or waste batteries or batteries must be recycled.