15
He will do the tool do the work better and safer in the range indicated by the manufacturer;
8. Use the right tool
Do not try to force small tools or attachments to do the job of a great and powerful tool. Do not use tools for specific activities (eg:
Do not use a circular saw cuts on branches or trunks);
9. Work with correct operate the clothing
Do not wear loose clothing or jewelry, they can be caught in moving machine parts are. When grinding outdoors is recommended
to wear protective hair rubber gloves and shoes with stable tread. If you have long hair, wear protective hair covering;
10. Use safety glasses
Furthermore, use breathing mask or if cuts is associated with release of suction;
11. Use dust collectors
If the equipment can be placed for extract and sabipane of suction, and assure their place ppavilno use;
12. Grounding-power cord.
Never Hold tool power cord, never pull cord to disconnect the power cord, cable and protective hair from oil and heated to dopip
objects and sharp edges;
13. Securing the workpiece
Use clamps or a vise to lock the workpiece, it is safer than if you are holding it by hand, but you can use both hands on the saw
for grinding tool;
14. Do not stretch to reach objects beyond your
the given tool may cause hazardous situation;
15. Giving the tool repaired only by a qualified person
This tool is towards the relevant rules of labor safety. Permitted repairs carried out only by a qualified pepsonal using original spare
parts, otherwise working for a significant risk of accident.
19. Preservation of the environment.
In view of environmental power, additional accessories and packaging must be subjected to appropriate
processing for reuse of the information contained in these materials.
Do not dispose of electric household waste! Under the EU Directive 2012/19/EC on waste electrical and
electronic devices and validation and as a national law power which can be used more, must be collected
separately and be subjected to appropriate processing for recovery of contained they scrap.
SAFETY RULES FOR LASER DEVICE
Laser device used in the power tool design is the class 2 with maximum power below 1mW and wavelength 650 nm. Such device
is not dangerous to your sight, however do not look directly at the source of the light (temporary blindness hazard).
WARNING. Do not look directly at the source of laser beam. It may cause hazards. Follow the below safety rules.
Use the laser device in accordance to the manufacturer’s instructions.
Do not, either intentionally or unintentionally, point the laser beam at people, animals or any object other than processed material.
Do not bring to accidental pointing the laser beam at bystanders’ or animals’ eyes for a period longer than 0.25 seconds, for
instance by pointing the laser beam at mirrors.
Always ensure the laser beam is directed at material which does not have any reflective surfaces. Reflective steel sheet does not
allow for laser use, because it might cause hazardous light reflection directed at operator, bystanders or animals.
Do not replace laser assembly with device of other type. Any repair should be conducted by the manufacturer or authorized
person.
