Raider Outboards R40ES-002, Руководство пользователя

Страница: 35 / 73

Raider 40 HP
SECTION 2
Owner’s Manual Standard Operating Procedures
26
O
PERATIONAL
C
HECKS
Pull Start .
Start the motor using the Recoil Starter.
Electric Start .
Start the motor using the Electric Start Push Button.
Neutral Safety .
Verify that the motor will not start in gear both forward and reverse.
Water discharge from check ports .
When the motor is running verify that water is being discharged from all check ports.
Tiller Steering .
When moving the Tiller Arm, verify that the motor moves freely to port and starboard.
Neutral .
Verify the propeller does not engage when the gear selector is in the neutral position.
Forward .
With the motor at idle, verify the Gear Selector moves freely into the forward position and the
propeller engages.
Reverse .
With the motor at idle, verify the Gear Selector moves freely into the reverse position and the
propeller engages.
Throttle Control .
With the engine in neutral, slowly increase the throttle RPM’s to approximately.
Emergency Stop Switch .
While the motor is running, remove the lock plate, the motor should stop.
Engine Stop Switch .
While the motor is running, press the Engine Stop Switch, the motor should stop.
Shallow Water Running .
Move the motor Reverse Lock Lever to the release position, lift the lower unit past a 45° angle until the
tilt stopper assembly locks.