19
Select/Stat:
RAID volume-selection/RAID volume-status. When the selection box
is empty, its means that the RAID is not selected. Status can be:
Normal
,
Degraded
,
Failed
,
Degraded recovering %
, etc.
Remove button:
Select by check-marking a RAID, and then if the “Remove”
button is clicked, the selected RAID volume will be removed/deleted.
Check button:
Select by check-marking a RAID, and then if the “Check” button is
clicked, the selected RAID volume will run consistency check for RAID-level: 5 or
6.
Create a HotSpare:
If the existing RAID-level is 5, 6, or 10, a HotSpare disk can be
added to it.
1.
Select by check-marking a RAID volume from the
Software RAID
Volume
window.
2.
Select a disk from the
Physical Volume
window.
3.
Click “
Create.
”
