5
Battery Install
Insert the battery into the battery holder with the
plug end facing the rear of the aircraft. Plug the
control board connection into the battery. Be
careful to maintain the correct polarity. The red dot
on the battery should be on the same side as the
red dot on the plug.
Move charge plug out and close door
maintain correct polarity by aligning the red dots
lights during charging. When the light goes out,
charging is complete.
Yellow Charge Light
Charging LiPo Battery
Center of Gravity
With the supplied battery installed in the battery holder, the CG of the Vintage Stick will
automatically be in the correct location. If a different battery is used or repairs have been made
to the airframe, the CG should be rechecked and weight adjusted to acheive the proper CG.
The Vintage Stick is very tolerant to changes in the CG location.
Содержание Micro VINTAGE STICK
Страница 12: ...2018 HRP Distributing Inc...