Rage Micro Sport Cub S2, Инструкция по эксплуатации

Страница: 6 / 12

6
Center Cont r ol Su r faces
With both the and the po w er ed on and the PASS s wi tch in the "No Assist"
check the control surfaces for correct centering. If the surface is not center ed, make
the adju stment to the pushr od length by either opening or closing the gap at the U-shaped
of the pushr od.
Adjust Here
Adjust Here
Rudder not properly center ed.
Rudder properly center ed.
El evator not properly center ed.
El evator properly center ed.
Elect r onic T r ims
All trims should be centered mechanically as
shown in the Center Control Surfaces above.
If adjustments are required for level flight when
flying the Micro Sport Cub, the electronic trims
should be used. If any up elevator trim is needed,
press the bo�om half of the elevator trim bu�on
several �mes un�l level flight is achieved. Do the
opposite if down trim is required.
Rudder
Trim
Elevator
Trim