MiniRAE 3000/ppbRAE 3000 Pocket Reference
17
Turning The Instrument On
1.
With the instrument turned off, press and hold
[MODE].
2.
When the display turns on, release the [MODE] key.
The instrument is now operating and performs self tests.
If any tests (including sensor and memory tests fail),
refer to the Troubleshooting section of the User’s Guide.
Note:
In Basic User/Hygiene Mode (the default setting),
the instrument stops after self-testing, and asks whether
to perform a zero air (fresh air) calibration. You can start
this calibration, quit, or abort the calibration while the
instrument is undergoing calibration. When the zero
calibration is done, you see screen telling you that the
zero calibration is complete, along with its value. After
calibration (or after you abort the calibration), the
instrument then shows a numerical reading screen with
icons. This indicates that the instrument is fully
functional and ready to use.
