2
www.raesystems.com
Datalog Type:
Set the type of datalogging. Choices
are Continuous or Event-driven. Choose Continuous
to log data at a set interval at all times (except when
the unit is Programming Mode). Choose Event-
driven to log data only when the dose rate readings
increase or the unit goes into alarm.
Quit:
To exit the Datalog menu, step through the
options using the MODE button until Quit is selected.
Then press the SET button.
Basics
Select Basics to change any of the following
parameters:
Backlight
Temp Unit
Gamma Unit
Change Date
Change Time
Quit
Press the MODE button to step through these options.
Select an option using the SET button. Once you
have selected a menu option, step through the
submenu options using the MODE button, and select
using the SET button.
