20
GammaRAE II Responder
Press the SET button to finish the TEST functions.
This returns GammaRAE II Responder to Normal
Operating Mode. During any test, if the SET button is
not pressed within 60 seconds, the unit automatically
moves on to the next test.
Programming Mode and Basic User Mode
Programming Mode and Basic User Mode are used to change
alarm settings and detector settings (units of measure, time,
etc.). All options are available in Programming Mode,
and it is password protected for security and use in larger
organizations, while only a portion of the settings are
changeable in Basic User Mode. No password is required for
Basic User Mode.
Note:
Changes to some parameters cause the detector to
automatically restart or recalibrate.
From Normal Operating Mode, simultaneously press the
MODE button and SET button, and hold them down for 3
seconds. The password entry screen is shown:
