Wir
ing the OBD_Bridge.
Shown below is a diagrammatic view from the rear of the gauge to indicate the wires and their colours.
Typcial colours indicated.
2 PIN Power Connector (TOP)
Wire Position
Wire
Wire Function
RIGHT SIDE
POWER - RED
+12V power in – switched power from the bike
LEFT SIDE
POWER_GRND -GREEN
GROUND connection – POWER GROUND for gauge and backlights.
ANALOGUE INPUT CONNECTOR (LEFT SIDE)
Connector Position
Wire Colour
Wire Function
Not Connected
POWER - RED
+12V power in – switched power from the bike
Fuel Sense Input
YELLOW / WHITE
Coolant Temp
GREEN / BLUE
Oil Temp
Not Standard
Oil Pressure
Not Standard
Oxygen Sense
Not Standard
Throttle Posn Sense
Not Standard
GROUND
GREEN
STATE INPUT CONNECTOR (RIGHT SIDE)
Connector Position
Wire Colour
Wire Function
TACHO Input
YELLOW
+12V power in – switched power from the bike
SPEEDO Input
WHITE / BLACK ??
High Beam Sense
BLUE
High Beam Indication
Oil Low Pressure Sense
BLIE/RED
BLACK / BROWN
Oil Warning Lamp indication
Fan On Sense
varies
Can be used for other function.
Fuel Low Sense / Neutral
sense
LIGHT GREEN/RED
Fuel Low Sense not often present if reserve position on tank – Can
be used for Neutral or other indicator
FUNCTIONS AS FUEL PROGRAMMING SWITCH IN INJECTOR MODE
Temp High Sense
Varies if present
Can be used for Neutral or Other
Содержание V1.02 OBD-Bridge
Страница 1: ...V1 02 OBD_Bridge Installation Manual Rae San 19 12 2019 ...
Страница 14: ...Temp Sensor Example 0 20 40 60 80 100 120 0 2 4 6 8 10 12 14 16 18 20 Chart Title Series1 Series2 ...
Страница 20: ...GROUND ...
Страница 26: ......