Radyne MM200, Инструкция по установке и эксплуатации

Страница: 107 / 192

MM200 High-Speed Microwave Modem Appendix A
TM086 – Rev. 4.1 A-7
Query Response
<1>
<1>
<1>
<1>
<1>
<4>
<1>
<1>
Selected channel
number
Channel Major Alarm
Status
Channel Minor Alarm
Status
Channel Latched
Major Alarm Status
Channel Latched
Minor Alarm Status
Channel Baud Rate
Baud State
Reserved 0 = channel1
1 = channel2
2 = channel3
3 = channel4
0 = Pass, 1 = Fail
Bit 0 = Mod daughter board FPGA status
Bit 1 = RF PLL lock detect status
Bit 2 - 7 = Spare
0 = Pass, 1 = Fail
Bit 0 = Loop lock status
Bit 1 = FEC lock status
Bit 2 = FIFO full status
Bit 3 = FIFO empty status
Bit 4 = FIFO active status
Bit 5 - 7 = Spare
0 = Pass, 1 = Fail
Bit 0 = Mod daughter board FPGA status
Bit 1 = RF PLL lock detect status
Bit 2 - 7 = Spare
0 = Pass, 1 = Fail
Bit 0 = Loop lock status
Bit 1 = FEC lock status
Bit 2 = FIFO full status
Bit 3 = FIFO empty status
Bit 4 = FIFO active status
Bit 5 - 7 = Spare
7000000 – 200000000
0 = Clock sourcing
1 = Out of lock
2 = Losing lock
3 = Acquiring
4 = Locked
5 = Too slow
6 = Too fast
7 = Searching up
8 = Searching down
Spare
Opcode: <0x2071> Query a selected modulator’s channel configuration
Command Data Field 1 Byte
<1> Selected channel
number 0 = channel1
1 = channel2
2 = channel3
3 = channel4