RADWAG PUE HX5.EX, Руководство пользователя

Страница: 12 / 52

12
•
Security stickers state - they must be complete (not broken/damaged etc.).
Broken stickers are impermissible, they may cause loss of both explosion
safety and warranty.
•
Indicator cover - make sure it is closed.
- cover screws torque – 0.5 Nm.
6. MAINTENANCE ACTIVITIES
Prior maintenance it is necessary to disconnect the indicator from the mains,
and to check grounding connection and state. You can clean the indicator
using regular household cleaners.
Clean the indicator when there is no risk of occurrence
of explosive atmosphere.
Clean the housing using a wet cloth. It is especially important
if the indicator is operated in a room where there is dry air.
Moisture protects against accumulation of electrostatic
charges.
Avoid using abrasive cleaners while cleaning the indicator's
housing, do not use concentrated acids, bases, solvents
or alcohol.
It is not allowed to clean the indicator using compressed air.
7. SERVICE AND REPAIR
If any damage of the device housing, display or keypad
occurs, it is necessary to disconnect the device form
the mains immediately. The damaged component must be
replaced or repaired by RADWAG service immediately.
In case of any problems with correct operation of the weighing indicator,
contact the closest manufacturer's service point.
In case of defects, deliver the faulty product to the manufacturer's service point.
If the product cannot be delivered to the manufacturer's service point, call the
service and report the defect. Repair scope and method will be set up.