- 43 -
Return to weighing:
Press the
key twice.
16.5. Control of % deviation referring to the inscribed standard mass
Scale software enables control of deviation (in %) of weighed loads
mass referring to the inscribed standard mass. Mass of standard can
be determined by its weighing (
PrcA
function) or entered to the scale
memory by an user (
PrcB
function).
16.5.1. Standard mass determined by its weighing
Procedure:
Enter to
<PrcA>
function:
You will see
<LoAd>
on the display and then:
place an load on the pan which mass will be accepted as standard
press
to confirm this operating mode
after few seconds the indication
100,00%
will be displayed
From this moment display will not indicate mass of weighed load
but deviation of load mass placed on the pan referring to the mass
of standard (in %).
