Figure 3: Scopia XT Server for IP Office Deployment
Deploying Scopia XT Desktop Server with Dual-NIC
Scopia XT Desktop Server can be installed on servers with multiple Network Interface Cards (NICs).
Depending on the deployment and network configuration, you may want to control which NIC is used for
various server communications.
Important:
The minimum requirement is to use a 100 Mbit NIC. It is recommended that you use a Gigabyte NIC
for better performance. Bandwidth shown is for Standard Definition (384 kbps) or High Definition
(1024 kbps).
For example, in secure multiple NIC deployments you can use a NIC configured behind the firewall to
communicate with the Scopia XT Server for IP Office, while using another NIC for Scopia XT Desktop
Client connections (
Figure 4: Scopia XT Desktop Server with a dual-NIC deployment
on page 11). In
this case, configure the Scopia XT Desktop IP address to represent the NIC behind the firewall. For the
Scopia XT Desktop public address, use a DNS name which resolves to the NIC outside the firewall, and
is accessible both inside and outside the enterprise.
For more information and to configure the public address, see
Defining Scopia XT Desktop Server
Public Address and Other Client Connection Settings
on page 28.
Deployment Guide for Scopia XT Desktop Server for IP Office
Version 8.2.1
Planning your Scopia XT Desktop Server Deployment | 10
