RADVision SCOPIA 400, Руководство по платформе, Страница: 9 / 39

SCOPIA 400 Platform Chassis Overview 1
1
SCOPIA 400 P
LATFORM
C
HASSIS
O
VERVIEW
This section introduces the
RADVISION
SCOPIA 400 platform and describes the
SCOPIA 400 chassis, and includes the following topics:
About the SCOPIA 400 Platform
About the SCOPIA 400 Chassis
About the Rear Transition Module
Viewing System Indicators
SCOPIA 400 Chassis Power Supply
A
BOUT THE
SCOPIA 400
P
LATFORM
The SCOPIA 400 platform is a high performance, multi-functional chassis that
supports mix-and-match functionality. This highly configurable and scalable
design provides maximum flexibility for configuring platforms to meet a wide
variety of functional and performance application requirements.
The SCOPIA 400 platform consists of a number of embedded applications on
blades that are inserted into the SCOPIA 400 chassis.
A
BOUT THE
SCOPIA 400
C
HASSIS
The SCOPIA 400 chassis is 3.5" (2U) high and can mount in a 19-inch rack. The
chassis can accommodate a
RADVISION
device blade in each of its four slots.
Each board receives power via the backplane.
There are four slots at the front and rear of the chassis. The front slots are used
for the main device boards. The rear slots are used only by Gateway Rear
Transition Module (RTM) boards which allow a connection to the ISDN or
serial network.