RADVision SCOPIA 400, Руководство по платформе, Страница: 13 / 39

SCOPIA 400 Platform Chassis Overview 5
SCOPIA 400 Chassis Power Supply
Figure 1-4 Removing a Power Supply Unit
4
Insert a new PSU, sliding it into the connectors inside the PSU
slot.
5 Press firmly on the new PSU to ensure that the connectors have
engaged properly and that the outside of the PSU is in line with
the chassis rear panel.
6
Check to see that the green LED lights up on the new PSU and
on the chassis front panel.
7 Tighten the screw.