RADLEY 6311-000, Руководство пользователя

Страница: 14 / 24

1. When the charger is plugged into the wall receptacle and NO battery is on the charger,
2. When a discharged battery is installed on the charger, the green indicator light will
the battery is being charged.
3. If the red indicator light does not come ON, check to make sure the battery pack is
slid fully onto the charger and the electrical outlet is working properly.
4. See Fig. 3 below for other indicator light functions.
5. A discharged battery pack should be fully charged in approximately 70 minutes.
7. If the battery pack does not charge properly, check to make sure the electrical outlet
8. Do not charge the batteries when the work area is or the battery temperature is at or
below 41°F/5°C or above 105°F /40.5°.
1. Remove the discharged battery park from the tool by pressing the battery release
button on the rear of the battery downward and slide the battery pack out of the
tool handle.
2. Slide the fully charged battery pack into the matching slots in the rear of the tool
handle where the discharged battery pack has been removed.
fully installed.
WARNING
Do not immerse battery pack in water. Sudden cooling could cause a hot battery
to explode or leak.
Green
Light
Red
Light
Battery Inserted
into Charger
Charging Status
ON OFF NO Charger connected to power supply
OFF ON YES Battery being charged
ON OFF YES Battery fully charged
ON OFF YES Battery is charged but not operational on
contact on battery or charging conditions
are either too hot or too cold.
13