manualshive.com logo in svg

Radius RADIUS GM300, Руководство пользователя

Поделиться
Скачать
Radius RADIUS GM300 Скачать руководство пользователя страница 62

Tutorials

GM300 Radio Service Software Manual

3-12 

6880902Z36-B

October, 1996

Cloning Radios

3

3.3.4 Step-by-Step Specific Cloning Instructions

In this subsection, you will:

❏

Read (get) into the RSS the specific file you want to clone from (source file),

❏

Clone that source file into the current radio's codeplug (target),

❏

Clone the remaining two radios the same way, and then

❏

Exit RSS.

3.3.4.1

Read Desired Source Archive File

Figure 3-2.

Reading (Getting) an Archive File from Disk

3.3.4.2

 Clone Current Radio From Archive File

Radio codeplugs consist of both personality and tuning data. Cloning allows you to “merge” two code-
plugs together. The archive file or radio with the desired personality is referred to as the source file or 
source radio. The other file is referred to as the target radio. The result is an image that can be pro-
grammed into a radio and/or saved to an archive file. This image will have the source codeplug's person-
ality, yet the tuning data of the target codeplug remains unchanged. In this tutorial, the source 
personality is the file saved in the first tutorial, and the target radios are the three radios not yet pro-
grammed. The procedures listed in Table 3-10 on page 3-13 should be followed:

Note:  The IDs for MDC-1200, Quik Call II, DTMF, etc. must be changed manually if you want to have 
unique IDs. You may do this by going to CHANGE/VIEW immediately after cloning each radio.

Содержание RADIUS GM300



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды