manualshive.com logo in svg

RadiSys EPC-2, Справочник по аппаратуре

Поделиться
Скачать
RadiSys EPC-2 Скачать руководство пользователя страница 22

EPC-2 HARDWARE REFERENCE  

Disk Formatting 

The hard disk in the EPC-2 is shipped from the factory low-level formatted with the 
proper interleave factor.  Depending on the context in which you ordered the EPC-2, the 
disk is either bootable (containing an operating system and other software pre-installed) 
or empty and not high-level formatted. 

If you wish to install a different operating system, including a version of MS-DOS ear-
lier than version 4.0, you will probably need to first reformat the disk.  Follow the in-
structions in your operating system manual.  For instance, to install MS-DOS 3.3, you 
will need to run the MS-DOS 4.0 FDISK program to delete the partition and then boot 
the system from the MS-DOS 3.3 floppy diskette and use the FDISK and SELECT pro-
grams. 

When installing DOS from floppy diskettes, be careful not to intermix Microsoft's ver-
sion of DOS (MS-DOS) with IBM's version (PC-DOS).  This can cause problems 
because the hidden files referenced by the boot block have different names in each.  If 
you are installing MS-DOS, install it using original MS-DOS diskettes or diskettes 
formatted on an MS-DOS system.  If you are installing PC-DOS, install it using original 
PC-DOS diskettes or diskettes formatted on a PC-DOS system. 

Floppy Disk Formatting 

Floppy diskettes can be formatted with the standard DOS or OS/2 format command, 
such as 

 

format a:

 

which will format the diskette in drive A as a 1.44 MB nonsystem diskette.  A frequent 
mistake is using this command to format a 720 KB diskette.  To format a 720 KB 
diskette, use the command 

 

format a: /N:9 /T:80

 

Low-level IDE (AT) Disk Formatting 

For low-level formatting of an IDE hard drive, a disk utility must be used, such as 
DOSUTILS from Ontrack Computer Systems, Inc., QAPlus from DiagSoft, Inc., 
AMIDIAG from American Megatrends Inc., or SuperSoft Service Diagnostics from 
SuperSoft Inc. 

Page 21 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание EPC-2






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды