manualshive.com logo in svg

Radionics Security System, Руководство пользователя, Страница: 28 / 36

Поделиться
Скачать
Radionics Security System Скачать руководство пользователя страница 28

28

Change Other Users’ Passcodes

I have this feature.

I do not have this feature.

This feature allows those with Owner type passcodes to change

the passcodes of system users.

1. Press Key 

6

 to enter Show User Mode.

2. Enter your passcode. (Owner type required.)

3. Press 

0

.

The 

Part 

light begins flashing. You are now in Owner

Passcode Change Mode.

4. Enter the number of the passcode you want to change (1 to 8).

5. Enter a new passcode 

with the same number of digits as

your passcode

.

The OK tone sounds.

If the error tone sounds, go to step 4. Try a different passcode.

6. Enter the new passcode again.

The OK tone sounds. Go to step 4 to change another
passcode or step 7 to continue.

If the error tone sounds, return to step 4. Be sure to enter the
same passcode in steps 5 and 6.

7. After changing a passcode you should check its user type.

Press 

Clear 

once to go back to Show User mode.

8. Press 

Clear 

a second time to exit the Passcode Change

mode.

71-07374-000-B Users Guide.p65

08/21/2001, 1:06 PM

28

Содержание Security System





































Отзывы:

Нет отзывов