D6500 Computer Interface Manual
74-05313-000-G 10/16/97
Page 4
© 1988-1997 Radionics, Inc.
Line Card Groups and Supervision Parameters
Line Card 1
(Line Card Options) program as needed for Rotary Hunt Groups and through
Supervision.
Line Card 8
Internal Printer Parameters
Device
(Internal Printer Select), usually set to Primary or Secondary. Other options include
Always On and Always Off.
NOTE:
Supervision operates independently from Device.
Supervision
(Internal Printer Supervision) should be Yes. If the printer is not supervised by the
receiver, there will be no indication at the computer if printer problems occur.
External Printer Parameters
Device
(External Printer Select), usually set to Primary or Secondary. Other options
include Always On and Always Off.
Supervision
(External Printer Supervision) should be Yes. If the printer is not supervised by the
receiver, there will be no indication at the computer, if printer problems occur.
XON/XOFF
(External Printer XON/XOFF) should be Yes to receive signals from the external
printer
CR/LF
(External Printer Carriage Return/Line Feed) Yes enables a carriage return line feed
between reports. No prints continuous reports.
Parity
(External Printer Parity) Even parity, Odd parity, No parity
Baud Rate
(External Printer Baud Rate) 110, 300, 600, 1200, 2400.
Data Bits
(External Printer Bit Transmission Value) Eight bit data transmission or Seven bit
data transmission.
Automation Config Parameters
Output Format
(Computer Output Format) Enable computer output messages in the selected
format:
SIA
Computer Interface Standard format
6500
21 character format output
(expanded reporting capabilities)
Device
(Computer Select), usually set to Primary or Secondary. Other options include
Always On and Always Off.
Supervision
(Computer Supervision) set to Yes if a computer is used.
