24
GB
AUX Operation
1. Before connecting to the mains socket, use a 3.5mm audio cable (not included) to
connect to your external audio device through the AUX socket at the rear of the unit.
2. Connect the mains adapter to the mains socket. Press on the unit to switch the unit
on.
3. Press MODE repeatedly to select Auxiliary Input mode.
4. You may operate your audio device directly for playback features.
5. Turn the / – dial to adjust the volume to your desired level.
Bluetooth® Operation
The unit has a Bluetooth function that can receive a signal within 10 metres.
Pair the unit with a Bluetooth device to listen to music:
1. Press the MODE button to select Bluetooth mode.
2. The display will flash in and repeatedly.
3. Activate your Bluetooth device and select the search mode.
4. “RNPDAB(B)(W)13E” will appear on your Bluetooth device.
5. Select “RNPDAB(B)(W)13E” and enter “0000” for the password if necessary.
6. “Device Connected” will show on the display when connection is successful.
7. To disconnect the Bluetooth function, switch to another function on the unit or disable
the function from your Bluetooth device.
• If the signal strength is weak, your Bluetooth receiver may disconnect, but it will
re-enter pairing mode automatically.
• This unit supports A2DP (Advanced Audio Distribution Profile).
• If the unit is not working properly, disconnect the power source and then reconnect it.
If the unit is idle for approximately 15 minutes, it will automatically switch to standby.
RNPDABB_W13E_IB_5L_RC_130729_Candice.indb 24
29/7/13 4:44 PM