M8N GPS SE100
RadioLlink M8N GPS SE100, benefits from 15 years of professional wireless experiences of RadioLink engineers,
exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement.
50 centimeter position accuracy. Positioning 20 satellites in 6 seconds at open ground. Industry-leading valley
station-keeping ability.
SE100 is suitable for all the open-source flight controller such as PIXHAWK, APM, NAZE32 and so on.
RadioLink M8N GPS SE100 Configuration
GPS decoder chip: RadioLink M8N GPS SE100 use the best receiving chip of first GPS brand u-blox UBX-
M8030(M8), 72-channel, MMIC BGA715L7 from Infineon, is much better than single GNSS 7N.
Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1, two GNSS working at the same time.
SBASL1 C/A: WAAS, EGNOS, MSAS
Geomagnetic: HMC5983 from Honeywell
Antenna: 2.5dbI high gain and selectivity ceramic antenna
Power amplify IC: MMIC BGA715L7 from Infineon
Double Filter: SAWF (Surface acoustic wave filter) form Murata
Parameter
1)
Positional Accuracy: 50 centimeter precision when working with concurrent GNSS.
2)
Velocity precision: 0.1m/s
Max update rate: up to 10Hz
3) Max height: 50000m
Max speed: 515m/s
4)
Max acceleration: 4G
5)
Sensitivity
Tracking & Nav: -167dBm, Capture signal: -163dBm, Cold start: -151dBm, Hot start: -159dBm.
6)
Time to first fix: Cold start: 26s, Hot start:1s.
7)
Connect ports
Power supply: voltage 5V DC+-5%, current 50~55mA
8)
Ports
A.
GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K
B.
Geomagnetic I2C interface
2
