3. The antenna must be kept away from conductive materials, such as metal and carbon by at
least a half inch. The coaxial part of the antenna does not need to follow these guidelines, but do
not bend it in a small radius.
4. Keep the antenna away from the motor, ESC, and other noise sources as much as possible.
5. The receiver can be packed by sponge or foam for shocking proof when it is installed to the
model.
After all of the above steps finished, now the program functions to assure it under control of
transmitter with a right connection.
Specification:
1. Channels:
9 channels: output 9 channels PWM signal, with red LED.
10 channels: output 10 channels signal, support SBUS and PWM signal output synchronously,
with blue LED.
2. Working voltage: 4.8-10V
3. Working current: 38-45mA（input voltage: 5V）
4. Size: 43*24*15mm
5. Weight: 9g
6. Receiver integrate telemetry sensor including signal strength and voltage. Support extended
engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS information,
Speed, voltage etc. on AT9/AT9S/AT10/AT10II display when work with flight controller APM or
PIX.
7. 4096 section precision, 0.25us per section, servo anti-shake rudder.
8. MINI receiver, just need one cable if use SBUS signal.
Содержание R9DS
Страница 2: ......
