RadioLink Electronic Ltd
3
1. R8FG Introduction
RadioLink R8FG 2.4G 8-channel receiver, splash-proof, with integrated gyro for professional car drifting
and high voltage servo supported
R8FG receiver is compatible with RadioLink RC8X/RC6GS V3/RC4GS V3/RC6GS V2/RC4GS
V2/RC6GS (3-position switch version)/RC4GS (version with P.D AFTER 180101) /T8FB(BT)
/T8S(BT)/T8FB(OTG)/T8S(OTG) transmitters.
2. Receiver Protocol Selection
If you are using R8FG with RC8X transmitter, please select correct receiver protocol in RC8X first and
then bind them. Enter the "Basic Menu" - "Receiver setting" of RC8X and then select FHSS V1 or FHSS
V2 protocol (as shown below). FHSS V1 receivers have a PWM output resolution of 2048, and FHSS V2
receivers have a PWM output resolution of 4096. The higher the resolution, the more delicate the angle
of servo motion.
Please click "Receivers List" (as shown above) to check whether the receiver you are currently using
belongs to FHSS V1 or FHSS V2 protocol list.
R8FG V1.0 (production date before Feb. 6, 2023) only
supports FHSS V1 protocol, not FHSS V2 protocol; R8FG V2.0 and later versions (production date on or
after Feb. 6, 2023) support FHSS V1 and FHSS V2 protocol.
Before operating the model, please make
sure protocol of the receiver is selected correctly, otherwise some functions will not work properly.
