Radiolink Electronic Limited
www.radiolink.com
4
R8FM
compatible with RadioLink remote controller
T8FB.
3.
Preparing Before Flight
3.1 Charge
First, please keep your battery is 4.2V to ensure your F110S with enough power to fly, you can
charge your battery by CM120 if not fully charged.
Professional Designed LiPo Battery Charger CM120
Energy Supply Station
Brand new designed LiPo battery charger CM120, designed for 1S LiPo battery. Inherit the high
precision of CB86PLUS, make the charging safer, battery which charged by CM120 is more powerful
can flight about five to eight minutes.
Charging current can setup 1A or 2A by toggle the switch as you need.
Red LED indicate charging mode and green LED indicate the battery is fully charged.
CM120 use universal USB connector, so you can use computer or power bank for mobile phone as
the power supply for CM120.
Pay attention: ensure the voltage output of power supply is not higher than 5V.
3.2 Remote Controller Setup
Setup If Controlled by AT9S/AT9/AT10/AT10II
(1)
Please turn on AT9S/AT9(DC 7.4~18V) or AT10/AT10II (DC 7.4~15V) first.
(2)
Make sure the model type of AT9S/AT9/AT10/AT10II is multirotor model, and the
CH3(throttle) is reverse.
Setup in BASIC MENU
--
MODEL TYPE
--
MULTIROTOR
Back to BASIC MENU
---
REVERSE
--
setup 3: THRO REV
