RadioLink Byme-DB, Инструкция по эксплуатации

Страница: 10 / 13

9
Servo Phase
Servo Phase Test
Please complete the attitude calibration first. After the attitude calibration is completed, you can test the servo phase.
Otherwise, the control surface may swing abnormally.
Switch to
Manual mode . Check whether the movement of the joysticks matches that of the corresponding control surface.
Take Mode 2 for transmitter as an example.
Servo Phase Adjustment
When the movement direction of the ailerons is inconsistent with the joystick movement, please adjust the servo phase by
pressing the buttons on the front of the Byme-DB.
Servo phase adjustment methods:
Servo phase test result Reason Solution LED
Move the aileron stick to the left, the movement
direction of the ailerons and tailerons is reversed Aileron mix control
reversed Short press the button
once Green LED of CH1
on/off
Move the elevator stick down, the movement
direction of the ailerons and tailerons is reversed Elevator mix control
reversed Short press the button
twice Green LED of CH2
on/off
Move the rudder joystick, the movement direction
of rudder servo is reversed Channel 4 reversed Short press the button
four times Green LED of CH4
on/off