Radiola GMRAVP100, Инструкция по эксплуатации, Страница: 19 / 48

Box content
Put on and remove the transport handle.
Pass the transport handle through the rounds positioned on both
sides of the projector.
Starting the device
Step 1: Connect the device to the
mains socket. The device is then
powered on and the red LED is on. This
means that the projector is powered
and in a state of charge.
Step 2: Press the button located
behind the projector.
Step 3: The video projector turns on,
the LED turns green and the screen
appears after a few seconds.
EN
_ 18 _ _ 19 _