Radioguide
®
VOX N40 Tourguide system
FUNCTION
TRANSMITTER
40 selectable channels.
Input through external microphone or built-in microphone.
LCD display.
(1) To show selected channel.
(2) To show battery status.
Power indicator.
Turn OFF automatically after stand by up to 30 minutes.
Built-in microphone: a backup when no external microphone is available.
Power supply: 2x AA alkaline battery.
RECEIVER
Up to 40 channels available to select.
ψ3.5mm stereo earphone jack.
LCD display.
(1) To show selected channel.
(2) To show battery status.
Power / RF indicator.
Turn OFF automatically after stand by up to 30 minutes.
Power supply: 2x AA alkaline battery.
HOW TO USE
TRANSMITTER
Insert batteries:
Open battery door.
Insert 2x Alkaline batteries (AA 1.5V)
Close battery door.
To switch ON:
Press On/Off button for 0.5 second to switch ON.
Power indicator LED becomes green.
LCD display shows selected channel and battery status as
.
Switched ON successfully.
To switch OFF:
Press On/Off button for 2 seconds then LCD will show OF (OFF), like
.
After “OF” disappears from LCD, the device is OFF.
Channel set up:
By pressing “+” button to move channel forward; pressing “-” button to move channel
backward
Press “+” and keep it still will speed up channel moving forward, and vice versa
Receiving audio resource:
Audio source will go through built-in microphone if no external microphone is used.
Built-in microphone will be out of function when external microphone is used.
LCD display:
When LCD shows
, it stands for channel 1 is used and the battery is full.
When the sign of battery is “flashing” as
shows, it means the batteries are
out of power. Please replace with new batteries or recharge.
The sign of battery energy will keep flashing and LCD will show “OF” (OFF) then it
turns OFF automatically if not replaced with new batteries, like
.
w w w . v o x n e t w o r k . n e t
4
/
8
