Radiodetection SPX RD8100, Руководство пользователя

Страница: 26 / 57

26
SideStep
SideStep allows you to change the output frequency on the transmitter. SideStep
changes the selected frequency by several Hertz and automatically sets the locator’s
locate frequency to match the transmitter’s output frequency.
1. On the locator, select the frequency you want by pressing the
key until the
frequency is displayed on screen.
2. To step the frequency, press and hold the key until STEP appears on the LCD.
3. Press the key to send the SideStep command to the transmitter.
4. If the command is sent successfully, an asterisk (*) will appear on the locator next to
the frequency and STEP will appear on the transmitter below the frequency.
5. To return to the standard locate frequency, press and hold the key. Once the
asterisk (*) has been removed from the display, press the key to send the
command to the transmitter
CALSafe
GPS equipped RD8100 locators models are equipped with a system which can be
enabled to force them to shut down once they are beyond the expected service /
calibration date.
When the unit is within 30 days of the service due date the unit will display at startup the
number of days left. The locator will stop functioning on the service due date.
CALSafe is disabled by default. You can enable the CALSafe feature and edit the
CALSafe service / calibration due date using the RD Manager PC software. Refer to the
RD Manager operation manual for further information.
Training
Radiodetection provides training services for most Radiodetection products. Our qualified
instructors will train equipment operators or other personnel at your preferred location or
at Radiodetection headquarters. For more information go to
www.radiodetection.com or
contact your local Radiodetection representative.
Care and maintenance
The RD8100 locator and transmitter are robust, durable and weatherproof. However you
can extend your equipment’s life by following these care and maintenance guidelines.
General
Store the equipment in a clean and dry environment.
Ensure all terminals and connection sockets are clean, free of debris and corrosion and
are undamaged.