Radiodetection rd7000+, Руководство пользователя

Страница: 8 / 22

Before you begin
IMPORTANT! Please read this section before you attempt to operate the
!
System setup
It is important that you set up the system according to your personal preferences and
operating requirements for your country before you conduct your first survey. You can
set the system up using the menu as described below.
Using the menu
The locator and transmitter menus allow you to select or change system
options. Once entered, the menu is navigated using the arrow keys. Navigation is
consistent on both the transmitter and the locator. When in the menu, most on-screen
icons will temporarily disappear and the menu options will appear in the bottom left-hand
corner of the LCD. Note that when browsing the locator menu, the and keys act
as left and right arrows. When browsing the transmitter menu the and keys act
as left and right arrows. The right arrow enters a submenu and the left arrow accepts the
selection and returns to the previous menu.
Locator menu options
VOL: Adjust the speaker volume from 0 (mute) to (loudest).
BATT: Set battery type. NiMH or ALK.
ALERT: Enable or disable Strike
Alert
™
.
FREQ: Enable or disable individual frequencies.
ANT: Enable or disable any antenna mode with the exception of Peak.
POWER: Set national power frequency: 50 or 60Hz.
LANG: Select your preferred system language.
CAL: Displays the date of the last factory calibration.
UNIT: Depth readings in metric or imperial units.
•
•
•
•
•
•
•
•
•