13
conversation time will be showed on the last line ( this happens only under Digital mode ).
3.Hold or keep the radio in a vertical position and place it between your lip within 2.5~5.0cm.
4.Press[PTT]key to answer the callLED indicator light change to red color.
5.Release[PTT]key to receive next call .
6.If there is no any transmitter within the time limited , the call failed .
Receive And Reply The Single Call
Single call means one individual radio call to another individual radio. Only with two types:
The first type is the self testing part before rise a call , The second type is ready for
immediate call .
When Receive The Single Call
1.LED indicator is green color
2.On the top of the screen will show RSSI markfollows shows single call user's name or
ID in the middleThe conversation time will be showed on the last line (Only for Digital mode ).
3. Hold or keep the radio in a vertical position and place it between your lip with 2.5~5cm.
If on the "free channel message sound" functionlet go [PTT] key ,You can hear a message
sound ,That means this channel is free for you to answer .
4. Press[PTT]key to answer the call, LED indicator light change to red color.
5. Release [PTT]key to receive the call.
Receive all calls
All call means a walkie talkie call up all other users in a channel to public an important
notices.
14
When receiving all calls
1.LED indicator becomes green.
2.On the top of the screen will show RSSI markfollows shows all calls, User's name or ID
in the middle, The conversation time will be showed on the last line (Only for Digital mode ).
3. End of the all calls, radio will back to the screen before receive all callsIf under the"free
channel message sound" functionIf you release the PTT key ,you will hear a short
message sound ,That means this channel is free to use ,but can't reply the all calls .
Notice: when receive the all calls ,if you turn over to another channelthe radio will stop to
receive this all callsDuring the all callsYou can't use any re-programmed key until the call
finished .
Launch a radio call
You can choose a channel , user ID or group call with following methods:
Channel Knob
Pre-programmed key
Contact lists
Using Channel Knob To Make A Call
Launch A Group Call
The radio should be under the group then can have the group call
1. Turn over channel knob , use an activated group name or ID to choose channel.
2. Hold or keep the radio in a vertical position and place it between your lip with 2.5~5cm.
3. Press[PTT]key to callLED indicator changes to red .Screen shows group name or ID .
